The first craft that I am going to share you is how I make knitted hats. Now these hats are really easy to make and they take about a day (depending on what size hat you make). Some may even take only a couple of hours.
So I start off with the following: Yarn, a Loom, Tape Measure, Yarn Needle, and a Hook.
Now that I have gathered all the material, I am able to start making a hat.
Step 1: I took the inside of the yarn and pull it out (so that I don't run into knots in my yarn while knitting). Starting at the peg of the side of the loom and wrap the yarn counterclockwise around each peg.
Step 2: Repeat step one so that know there are 2 layers of yarn.
Step 3 is to bring the lower row of yarn above the top row (using the hook) so that there is only one row. Once a complete circle has been made, the yarn is pushed down to the bottom so that is is now the first row of yarn.
Step 4 is to repeat step 2 and 3 were repeated until I had about 4 inches that were knitted
Step 5 bring the lower edge of the now knitted yarn and place them over the pegs. This created the bream. So it looks like the following.
| From Above |
| From the side |
Step 6 was to repeat step 2 and 3 again, but now until I have approximately 8-9 inches (this doesn't really matter, for this hat I did 10 inches)
Step 7: Now that the brim is made and that the hat is the right length. I can begin to take the hat off the pegs. About 18 inches of yarn was cut off from the end and was threaded through the needle. One peg at a time the needle was threaded through the pegs collecting all of the loops on each peg together.
| This is half way done |
| My holey hat |
| The Finished Outcome!! |
If you would like to make a hat like this, you can buy all the supplies at your closest Michaels store. You will get 4 looms (of 4 different sizes) a needle and a hook in one package.
Sarah this is so cool! I love that you're blogging! The hat looks sweeeet. :)
ReplyDelete